Replacing the elements in my Skutt Kiln was not as arduous a task as I thought it would be.  The kiln is actually pretty easy to maintainance once I got into the task of replacing them.  I bought the kiln used almost a year ago, despite the obvious wear I could not pass up the price that they were asking for it.  Most of the firebrick is in good condition, except for the top ring where there was some wear and tear.

Besides getting power to the kiln, there was one other obstacle in my way of using the kiln.  It was rated for 208 volts  single phase and a quick check with the local utilities verified that we have 240 volts single phase here at the studio.  So I called up Skutt the kiln’s manufacturer to find out what I needed to do so I could safely fire the kiln.  Skutt informed me that all that was required was a change in the elements rated for 208v to 240v. Once that was done the kiln would then be rated for cone 8 instead of cone 5.  I ordered the elements, 2 per ring, and a few new bricks for the top ring to replace the ones that were in really bad shape.  A few days later the replacement parts showed up to my delight.  Unfortunately that was during the middle of the spring semester and I would not have enough free time to change out the parts until this past week after I had gotten home and settled from my study abroad to Italy.

I took a few pictures to help illustrate the steps involved in changing the elements in a Skutt Kiln.

The first picture is of the kiln before I started the project.

I decided the easiest way change the elements was if I had the kiln disassembled and worked my way up from the bottom ring to the top.  As you can see in the image the kiln has been constructed in 5 major pieces, the bottom, 3 rings that hold the elements and the lid.  There is a rod that hold the kiln’s lid open on left side that is held to the lid by a thumb screw, once removed the rod can be taken off an the rod that holds the hinge together and the lid can be lifted off the kiln, I suggest that you get someones help when lifting these parts and moving them as the firebrick is fragile and easily broken, it is also very expensive to replace.  After removing the lid, I had to take the controller off the front and separate the rings.

(continue reading…)

I have a few pieces of green ware patiently waiting for me to get my kiln finished so I can start firing them and treating their surfaces with vitreous engobes.  I had an assignment from one of my teachers this past spring to work in a series and he wanted me to work in clay since that was my strength, which is funny to me because I was in an interpretive drawing class at the time.  After many hours of doodling in my sketchbook I started to notice a pattern to my madness and settled into doing Kiln Gods.  In my line of work no matter what preparations are made, there is still a lot left up to chance.  We prepare our work to the best of our ability, and try to control the firing process as much as possible, but in the end there are some things out of our control, in a way it is analogous to life and there comes a time in life when we have to say that we have done all that we can do and place the rest into the hands of a higher power.  For me that is what the Kiln Gods represent.  They have been used by potters the world round to watch over their firings and help them get through the process with the best possible results as then can.  The ones that I sculpted are not modeled after any specific cultures existing Kiln Gods, but are symbolic to me or my interpretation of what I think may be important to the culture that influenced them.  Part of me hesitates to share this work in progress, but I want to share something with you that I have been working on recently:

I received exciting news that I have been accepted as one of the pottery instructors at the Timpanogos Storytelling Festival this September 2-4, 2010.  I am really looking forward to this opportunity.  My friend Tammy Rodeback and some other local potters will also be in attendance.  I can’t wait to get to know them better and interact with all the attendees at the Festival.  Ever since Inez and I have lived here in Orem we have wanted to attend the Storytelling Festival, and now I get to work at it!.

The creative juices have been flowing and I have work planned, I just need to finish wiring in my kiln and I will be able to complete the projects that are waiting for their firing.

– Jerel